Table of Contents
Advertisement
Chapter 11
| Interface Commands
Interface Configuration
show interfaces
history
Table 75: show interfaces counters - display description
Parameter
Input utilization
Octets Output in kbits per
second
Packets output per second
Output utilization
This command displays statistical history for the specified interfaces.
show interfaces history [interface [name [current |
previous index count] [input | output]]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-26)
name - Name of sample as defined in the
(Range: 1-32 characters)
current - Statistics recorded in current interval.
previous - Statistics recorded in previous intervals.
index - An index into the buckets containing previous samples.
(Range: 1-96)
count - The number of historical samples to display. (Range: 1-96)
input - Ingress traffic.
output - Egress traffic.
Default Setting
Shows historical statistics for all interfaces, intervals, ingress traffic, and egress
traffic.
Command Mode
Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Description
The input utilization rate for this interface.
Number of octets leaving this interface in kbits per second.
Number of packets leaving this interface in packets per second.
The output utilization rate for this interface.
– 404 –
(Continued)
history
command.
Hide quick links:
Advertisement
Table of Contents
