Technical Support Commands - D-Link xStack DGS-3400 Series Reference Manual

xStack
The Technical Support commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
show tech_support
upload tech_support_toTFTP
Each command is listed, in detail, in the following sections.
show tech_support
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the information of technique's support:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Parameters
<ipaddr> <path_filename 64>
Used to show the information of technique's support.
show tech_support
This command is especially used by the technical support personnel to dump the device
overall operation information. The information is project dependent and includes the following
information.
•
Basic System information
•
system log
•
Running configuration
•
Layer 1 information
•
Layer 2 information
•
Layer 3 information
•
Application
•
OS status
•
Controller's status
This command can be interrupted by Ctrl - C or ESC when it is executing.
None.
Only Administrator and Operator-level users can issue this command.
T
ECHNICAL
570
80
S C
UPPORT OMMANDS