D-Link xStack DGS-3400 Series Reference Manual page 241

xStack
show erps
Parameters
Restrictions
Example usage:
To display ERPS information:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
example, the RPL owner conflict occurs. "Active" is used to indicate that the RPL owner
administrative state is enabled and the device is operated as the active RPL owner. "Inactive"
is used to indicate that the RPL owner administrative state is enabled, but the device is
operated as the inactive RPL owner.
raps_vlan <vlanid> - Specifies the R-APS VLAN.
sub_ring - Display sub-ring configuration information.
None.
237