D-Link xStack DGS-3400 Series Reference Manual page 194

xStack
To create a DHCPv6 pool pool1:
DGS-3450:admin# create dhcpv6 pool pool1
Command : create dhcpv6 pool pool1
success
DGS-3450:admin#
delete dhcpv6 pool
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the DHCPv6 pool by specifying the pool name pool1:
DGS-3450:admin# delete dhcpv6 pool pool1
Command: delete dhcpv6 pool pool1
Success.
DGS-3450:admin#
show dhcpv6 pool
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the DHCPv6 pool by specifying the pool name pool1:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
This command is used to delete one or all DHCPv6 pools.
delete dhcpv6 pool [<pool_name 12> | all]
This command will delete a DHCPv6 pool that was created with the create dhcpv6 pool
command.
pool <pool_name 12> - Enter a name of up to 12 alphanumeric characters to identify the pool
to be deleted with this command.
all - If specify this parameter, all DHCPv6 pools on the Switch will be deleted.
Only Administrator and Operator-level users can issue this command.
This command is used to display one or all DHCPv6 pools configuration.
show dhcpv6 pool {<pool_name 12>}
This command will show one or all DHCPv6 pools configuration that were created with the
create dhcpv6 pool command.
pool <pool_name 12> - Enter the name of the DHCPv6 pool for which to view the pool
information.
Entering this command without the pool name will display all pools information of the
DHCPv6 server.
None.
190