D-Link xStack DGS-3400 Series Reference Manual page 110

xStack
DGS-3450:admin# show authentication ports
Command: show authentication ports
Port Methods
---- ------------
1 None
2 Any
3 802.1X_IMPB
4 None
5 IMPB_JWAC
6 None
7 None
8 802.1X_IMPB
9 None
DGS-3450:admin#
enable authorization
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
This example sets authorization global state enabled:
DGS-3450:admin# enable authorization attributes
Command: enable authorization attributes
Success.
DGS-3450:admin#
disable authorization
Purpose
Syntax
Description
Parameters
Restrictions
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Auth Mode Authentication VLAN(s)
----------- ---------------------
Host based 1,3,5,9,11,88,16
Port based
Host based
Host based 2000,2005
Port based
Host based
Host based 1-20
Host based
Host based
The enable authorization command will enable authorization.
enable authorization attributes
Used to enable authorization attributes.
When the authorization for attributes is enabled, whether the authorized attributes (for
example VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server or local
database will be accepted which depends on the individual module's setting.
Authorization for attributes is enabled by default.
None.
Only Administrator and Operator-level users can issue this command.
The disable authorization command will disable authorization.
disable authorization attributes
Used to disable authorization attributes.
When the authorization for attributes is disabled, the authorized attributes (for example
VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server or local database
will be ignored even if the individual module's setting is enabled.
Authorization for attributes is enabled by default.
None.
Only Administrator and Operator-level users can issue this command.
18,56
106