D-Link xStack DGS-3400 Series Reference Manual page 122

Xstack dgs-3400 series layer 2 managed gigabit ethernet switch
Hide thumbs Also See for xStack DGS-3400 Series:
Table of Contents

Advertisement

xStack
config cfm ma
Restrictions
Example usage:
To configure a CFM MA:
DGS-3450:admin#config cfm ma op1 md op_domain vlanid 1 ccm_interval 1sec mepid_list add 1
Command: config cfm ma op1 md op_domain vlanid 1 ccm_interval 1sec mepid_list add 1
Success.
DGS-3450:admin#
create cfm mep
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a CFM MEP:
DGS-3450:admin#create cfm mep mep1 mepid 1 md op_domain ma op1 direction inward port 1:2
Command: create cfm mep mep1 mepid 1 md op_domain ma op1 direction inward port 1:2
Success.
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
created maintenance association.
Only Administrator and Operator-level users can issue this command.
Used to create an MEP.
create cfm mep <string 32> mepid <int 1-8191> md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>] direction [inward |
outward] port <port>
Different MEPs in the same MA must have a different MEPID. MD name, MA name, and
MEPID that together identify a MEP.
Different MEPs on the same device must have a different MEP name. Before creating an
MEP, its MEPID should be configured in the MA's MEPID list.
mep <string 32> - Enter the MEP name. It is unique among all MEPs configured on the
device.This name can be up to 32 characters long.
mepid <int 1-8191> - Specify the MEP MEPID. It should be configured in the MA's MEPID list
first.
md <string 22> - Specify the maintenance domain name.
md_index <uint 1-4294967295> - Specify the maintenance domain index.
ma <string 22> - Specify the maintenance association name.
ma_index <uint 1-4294967295> - Specify the maintenance association index.
direction - Specify the MEP direction.
inward – Specify the inward facing (up) MEP.
outward – Specify the outward facing (down) MEP.
port <port> - Specify the port number. This port should be a member of the MA's associated
VLAN.
Only Administrator and Operator-level users can issue this command.
118

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents