D-Link xStack DGS-3400 Series Reference Manual page 353

xStack
Example usage:
To configure the redirect destination and delay time:
DGS-3450:admin# config jwac redirect destination jwac_login_page delay_time 5
Command: config jwac redirect_ destination jwac_login_page delay_time 5
Success.
DGS-3450:admin#
config jwac virtual_ip
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure virtual IP address to accept authentication request from host:
DGS-3450:admin# config jwac virtual_ip 1.1.1.1 url www.kyoto.ac.jp
Command: config jwac virtual_ip 1.1.1.1 url www.kyoto.ac.jp
Success.
DGS-3450:admin#
config jwac quarantine_server_url
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to configure JWAC virtual ipaddress to accept authentication requests from un-
authenticated hosts.
config jwac virtual_ip <ipaddr> {url [<string 128> | clear]}
The virtual IP of JWAC is used to accept authentication request from unauthenticated host.
Only requests sent to this IP will get response correctly.
This IP does not respond to ARP request or ICMP packet!
<ipaddr> - To specify the IP address of the virtual IP.
url - This parameter is used to set the URL of virtual IP.
Only Administrator and Operator-level users can issue this command.
Used to configure JWAC Quarantine Server URL.
config jwac quarantine_server_url <string 128>
This command allows you to configure URL of Quarantine Server.
If the redirection is enabled and the redirection destination is Quarantine Server, when a
HTTP request from unauthenticated host which is not headed to Quarantine Server reaches
the Switch, the Switch will handle this HTTP packet and send back a message to the host to
make it access Quarantine Server with the configured URL
When the PC connected to the specified URL, the quarantine server will request the PC user
to input the user name and password to authenticate.
NOTE: If the quarantine server is linked to the JWAC enabled port on the switch, it must be
added to the static FDB correctly before it can work properly.
<string 128> - To specify the entire URL of authentication page on Quarantine Server
Only Administrator and Operator-level users can issue this command.
349