D-Link xStack DGS-3400 Series Reference Manual page 11

xStack
{braces}
Example command
Line Editing Key Usage
Delete
Backspace
Insert or Ctrl+R
Left Arrow
Right Arrow
Up Arrow
Down Arrow
Tab
Multiple Page Display Control Keys
Space
CTRL+c
ESC
n
p
q
r
a
Enter
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
necessary to specify either optional value, however the effect of the system reset is dependent
on which, if any, value is specified. Therefore, with this example there are three possible
outcomes of performing a system reset. See the following chapter, Basic Commands for more
details about the reset command.
reset config
Deletes the character under the cursor and then shifts the remaining characters in the line to the
left.
Deletes the character to the left of the cursor and then shifts the remaining characters in the line
to the left.
Toggle on and off. When toggled on, inserts text and shifts previous text to the right.
Moves the cursor to the left.
Moves the cursor to the right.
Repeats the previously entered command. Each time the up arrow is pressed, the command
previous to that displayed appears. This way it is possible to review the command history for the
current session. Use the down arrow to progress sequentially forward through the command
history list.
The down arrow will display the next command in the command history entered in the current
session. This displays each command sequentially as it was entered. Use the up arrow to
review previous commands.
Shifts the cursor to the next field to the left.
Displays the next page.
Stops the display of remaining pages when multiple pages are to be displayed.
Stops the display of remaining pages when multiple pages are to be displayed.
Displays the next page.
Displays the previous page.
Stops the display of remaining pages when multiple pages are to be displayed.
Refreshes the pages currently displayed.
Displays the remaining pages without pausing between pages.
Displays the next line or table entry.
7