D-Link xStack DGS-3400 Series Reference Manual page 64

xStack
Example usage:
To configure the TACACS+ authentication server host with an IP address of 10.1.1.222 to have the key value "This is a
secret":
DGS-3450:admin# config authen server_host 10.1.1.222 protocol tacacs+ key "This is a
secret"
Command: config authen server_host 10.1.1.222 protocol tacacs+ key "This is a se
cret"
Success.
DGS-3450:admin#
delete authen server_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an authentication server host, with an IP address of 10.1.1.222, that is running the TACACS+ protocol:
DGS-3450:admin# delete authen server_host 10.1.1.222 protocol tacacs+
Command: delete authen server_host 10.1.1.222 protocol tacacs+
Success.
DGS-3450:admin#
show authen server_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all authentication server hosts:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
This command is used to delete an authentication server host.
delete authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
Deletes an authentication server host.
server_host - Specify the server host's IP address.
protocol tacacs - Specify that the server host's authentication protocol is TACACS.
protocol xtacacs - Specify that the server host's authentication protocol is XTACACS.
protocol tacacs+ - Specify that the server host's authentication protocol is TACACS+.
protocol radius - Specify that the server host's authentication protocol is RADIUS.
Only Administrator can issue this command.
This command is used to display the authentication server hosts.
show authen server_host
Displays the authentication server hosts.
None.
Only Administrator can issue this command.
60