D-Link xStack DGS-3400 Series Reference Manual page 388

xStack
DGS-3450:admin# show lldp ports 1
Command: show lldp ports 1
Port ID
-------------------------------------------------------------------
Admin Status
Notification Status
Advertised TLVs Option
Port Description
System Name
System Description
System Capabilities
Enabled Management Address
(None)
Port VLAN ID
Enabled Port_and_Protocol_VLAN_ID
(None)
Enabled VLAN Name
(None)
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
DGS-3450:admin#
show lldp local_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display outbound LLDP advertisements for port 1:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
: 1:1
: TX_and_RX
: Disabled
:
Used to display the per-port information currently available for populating outbound LLDP
advertisements.
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
This command displays the per-port information currently available for populating outbound
LLDP advertisements.
<portlist> – Use this parameter to define ports to be configured.
brief – Display the information in brief mode.
normal – Display the information in normal mode. This is the default display mode.
detailed – Display the information in detailed mode.
None.
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
384