D-Link xStack DGS-3400 Series Reference Manual page 276

xStack
delete vlan_translation ports
Syntax
Description
Parameters
Restrictions
Example usage:
To delete VLAN translation rule on ports 1-4:
DGS-3450:admin# delete vlan_translation ports 1-4
Command: delete vlan_translation ports 1-4
Success.
DGS-3450:admin#
show vlan_translation
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show C-VLAN based VLAN translation rules in the system:
DGS-3450:admin# show vlan_translation
Commands: show vlan_translation
Port CVID SVID
------ ----- -----
1 10
1 20
1 30
2 10
2 20
Total Entries: 5
DGS-3450:admin#
create vlan_translation ports
Purpose
Syntax
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
delete vlan_translation ports [ <portlist> | all ] { cvid <vidlist> }
The delete vlan_translation command is used to delete translation relationship between C-
VLAN and S-VLAN.
ports - The translation rule for the specified ports.
cvid - The rules for the specified CVIDs. If CVID is not specified, all rules configured for the
port will be deleted.
Only Administrator and Operator-level users can issue this command.
Used to show existed C-VLAN based VLAN translation rules.
show vlan_translation ports <portlist>
Used to show existed C-VLAN based VLAN translation rules.
ports - The C-VLAN based VLAN translation rule of the ports.
Only Administrator and Operator-level users can issue this command.
Action Priority
------ --------
100 Add 4
100 Add 5
200 Add 6
100 Add 7
100 Add 1
Use this command to create the CVID VLAN translation rules.
create vlan_translation ports [<portlist> | all ] cvid <vidlist> [add | replace] svid <vlanid
1-4094> {priority <value 0-7>}
272