D-Link xStack DGS-3400 Series Reference Manual page 14

xStack
config account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the user password of "dlink" account:
DGS-3450:admin# config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3450:admin#
show account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the accounts that have been created:
DGS-3450:admin# show account
Command: show account
Current Accounts:
Username
---------------
dlink
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to configure user accounts.
config account <username> {encrypt [plain_text| sha_1] <password>}
The config account command configures a user account that has been created using the
create account command.
<username> – Enter a name between 1 and 15 alphanumeric characters to define the
administrator account to configure here.
encrypt - Specifies that the account uses encryption.
plain_text - Specifies that the account uses the plain text encryption.
sha_1 - Specifies that the account uses the SHA-1 encryption.
<password> - Enter the password here.
Only Administrator-level users can issue this command.
Used to display user accounts
show account
Displays all user accounts created on the Switch. Up to eight user accounts can exist at one
time.
None.
Only Administrator-level users can issue this command.
Access Level
------------
Admin
10