D-Link xStack DGS-3400 Series Reference Manual page 127

xStack
show cfm ports
Restrictions
Example usage:
To show the CFM ports:
DGS-3450:admin#show cfm ports 1:3-1:6
Command: show cfm ports 1:3-1:6
Port State
----- --------
1:3 Enabled
1:4 Enabled
1:5 Enabled
1:6 Disabled
DGS-3450:admin#
show cfm
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the CFM configuration:
DGS-3450:admin#show cfm
Command: show cfm
CFM State: Disabled
MD Index MD Name
---------- ----------------------
1 op_domain
DGS-3450:admin#show cfm md op_domain
Command: show cfm md op_domain
MD Index : 1
MD Name : op_domain
MD Level : 2
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
None.
Used to show the CFM configuration.
show cfm {[md [<string 22> | md_index <uint 1-4294967295>] {ma [<string 22> |
ma_index <uint 1-4294967295>] {mepid <int 1-8191>}} | mepname <string 32>]}
This command is used to show the CFM configuration.
md <string 22> - Specify the maintenance domain name.
md_index <uint 1-4294967295> - Specify the maintenance domain index.
ma <string 22> - Specify the maintenance association name.
ma_index <uint 1-4294967295> - Specify the maintenance association index.
mep <string 32> - Enter the MEP name. It is unique among all MEPs configured on the
device.This name can be up to 32 characters long.
mepid <int 1-8191> - Specify the MEP MEPID. It should be configured in the MA's MEPID list
first.
None.
Level
-----
2
123