D-Link xStack DGS-3400 Series Reference Manual page 339

xStack
DGS-3450:admin#enable ipv6_route_longprefix log
Command: enable ipv6_route_longprefix log
Success.
DGS-3450:admin#
disable ipv6_route_longprefix
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the syslog recording function:
DGS-3450:admin#disable ipv6_route_longprefix log
Command: disable ipv6_route_longprefix log
Success.
DGS-3450:admin#
show ipv6_route_longprefix status
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the settings about IPv6 route with long prefix:
DGS-3450:admin#show ipv6_route_longprefix status
Command: show ipv6_route_longprefix status
IPv6 Route With Long Prefix Settings:
State : Disabled
Log : Disabled
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to disable to record syslog for the function supporting IPv6 route with prefix more than
64 bits.
disable ipv6_route_longprefix {log}
If the log is disabled, when one such IPv6 route will not work because of limitation of
resource, one syslog will not be recorded.
log - Specifies to disable the syslog recording function.
Only Administrator and Operator-level users can issue this command.
Used to display the settings about IPv6 route with prefix more than 64 bits.
show ipv6_route_longprefix status
This command is used to display the settings about IPv6 route with prefix more than 64 bits.
None.
None.
335