D-Link xStack DGS-3400 Series Reference Manual page 375

xStack
show lacp_port
Syntax
Description
Parameters
Restrictions
Example usage:
To display LACP port mode settings:
DGS-3450:admin# show lacp_port 1-10
Command: show lacp_port 1-10
Port Activity
----- --------
1:1 Active
1:2 Active
1:3 Active
1:4 Active
1:5 Active
1:6 Active
1:7 Active
1:8 Active
1:9 Active
1:10 Active
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
show lacp_port {<portlist>}
This command will display the LACP mode settings as they are currently configured.
<portlist> − Specifies a port or range of ports to be configured. The beginning and end of the
port list range are separated by a dash. Non-contiguous portlist entries are separated by a
comma. (ex: 1-3,7-9) If no parameter is specified, the system will display the current LACP
status for all ports.
None.
371