D-Link xStack DGS-3400 Series Reference Manual page 427

xStack
debug stp show flag
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the debug STP levels on all ports:
DGS-3450:admin# debug stp show flag
Command: debug stp show flag
Global State: Enabled
Port Index Event flag
---------- ----------
1 Detail
2 Detail
3 Detail
4 Detail
5 Detail
6 Detail
7 Detail
8 Detail
9 Detail
10 Detail
11 Detail
12 Detail
Success.
DGS-3450:admin#
debug stp show counter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the STP counters for port 9:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to show the per-port STP debug level.
debug stp show flag {ports <portlist>}
This command used to display the STP debug level on specified ports.
ports <portlist> - Specifies the STP ports to display
If no parameter is specified, all ports on the switch will be displayed.
Only Administrator and Operator-level users can issue this command.
BPDU Flag State Machine Flag
--------- ------------------
Brief
Brief
Brief
Brief
Brief
Brief
Brief
Brief
Brief
Brief
Brief
Brief
Used to show the STP counters.
debug stp show counter { ports [ < portlist > | all ] }
This command used to display the STP counters.
ports <portlist> - Specifies the STP ports for display..
all - Display all port's counters
If no parameter is specified, display the global counters.
Only Administrator and Operator-level users can issue this command.
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
423