D-Link xStack DGS-3400 Series Reference Manual page 249

xStack
Example usage:
To display the multicast MAC address table:
DGS-3450:admin# show multicast_fdb
Command: show multicast_fdb
VLAN Name
MAC Address
Egress Ports
Mode
Total Entries : 1
show fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the FDB table:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
: default
: 01-00-00-00-00-01
: 1:1-1:5,1:26,2:26
: Static
Used to display the current unicast MAC address forwarding database.
show fdb { port <port> | [ vlan <vlan_name 32> | vlanid <vidlist>] | mac_address
<macaddr> | static | aging_time}
The show fdb command displays the current unicast MAC address forwarding database.
port - Displays the entries for one port.
vlan_name - Displays the entries for a specific VLAN.
vlanid - Display the entries for the VLANs indicated by VID list.
static - Displays all permanent entries.
aging_time - Displays the unicast MAC address aging time.
If no parameter is specified, system will display the unicast address table.
None.
245