D-Link xStack DGS-3400 Series Reference Manual page 377

xStack
Each command is listed, in detail, in the following sections.
enable lldp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable LLDP:
DGS-3450:admin# enable lldp
Command: enable lldp
Success.
DGS-3450:admin#
disable lldp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable LLDP:
DGS-3450:admin# disable lldp
Command: disable lldp
Success.
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to enable LLDP operation on the Switch.
enable lldp
This is a global control for the LLDP function. When this function is enabled, the switch can
start to transmit LLDP packets and receive and process the LLDP packets. The specific
function of each port will depend on the per port LLDP setting. For the advertisement of
LLDP packets, the switch announces the information to its neighbor through ports. For the
receiving of LLDP packets, the switch will learn the information from the LLDP packets
advertised from the neighbor in the Neighbor's table. The default state for LLDP is disabled.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable LLDP operation on the Switch.
disable lldp
This command will stop the sending and receiving of LLDP advertisement packets on the
Switch.
None.
Only Administrator and Operator-level users can issue this command.
373