D-Link xStack DGS-3400 Series Reference Manual page 25

xStack
DGS-3450:admin# config greeting_message
Command: config greeting_message
Greeting Messages Editor
===============================================================================
Copyright(C) 2010 D-Link Corporation. All rights reserved.
================================================================================
<Function Key>
Ctrl+C Quit without save
Ctrl+W Save and quit
show greeting_message
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the currently configured greeting message:
GS-3450:admin#show greeting_message
Command: show greeting_message
================================================================================
Copyright(C) 2012 D-Link Corporation. All rights reserved.
================================================================================
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
DGS-3450 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 2.70.B56
<Control Key>
left/right/
Ctrl+D
Ctrl+X
Ctrl+L
Used to view the currently configured greeting message configured on the Switch.
show greeting_message
This command is used to view the currently configured greeting message on the
Switch.
None.
Only Administrator and Operator-level users can issue this command.
DGS-3450 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 3.00.B10
up/down Move cursor
Delete line
Erase all setting
Reload original setting
21