D-Link xStack DGS-3400 Series Reference Manual page 126

xStack
disable cfm
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the CFM globally:
DGS-3450:admin#disable cfm
Command: disable cfm
Success.
DGS-3450:admin#
config cfm ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the CFM ports:
DGS-3450:admin#config cfm ports 1:2-1:5 state enable
Command: config cfm ports 1:2-1:5 state enable
Success.
DGS-3450:admin#
show cfm ports
Purpose
Syntax
Description
Parameters
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to disable the CFM globally.
disable cfm
This command is used to disable the CFM globally.
None.
Only Administrator and Operator-level users can issue this command.
Used to enable or disable the CFM function on a per-port basis.
config cfm ports <portlist> state [enable | disable]
By default, the CFM function is disabled on all ports.
If CFM is disabled on a port:
•
MIPs can never be created on the port.
•
MEPs can still be created on the port, and the configuration can be saved.
•
MEPs created on that port can not generate or process CFM PDUs. If the user issues a
Loopback or Link trace test on those MEPs, it will prompt a message that the CFM
function is disabled on that port to user.
ports <portlist> - Specify the logical port list.
state [enable | disable] - Enable or disable the CFM function.
Only Administrator and Operator-level users can issue this command.
Used to show the CFM state of specified ports.
show cfm ports <portlist>
This command is used to show the CFM state of specified ports.
ports <portlist> - Specify the logical port list.
122