D-Link xStack DGS-3400 Series Reference Manual page 139

xStack
DGS-3450:admin#config cfm ais md op_domain ma op1 mepid 1 state enable level 5
Command: config cfm ais md op_domain ma op1 mepid 1 state enable level 5
Success.
DGS-3450:admin#
config cfm lock md
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the LCK function state as enabled and specify a client level of 5:
DGS-3450:admin#config cfm lock md op_domain ma op1 mepid 1 state enable level 5
Command: config cfm lock md op_domain ma op1 mepid 1 state enable level 5
Success.
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to configure the parameters of the LCK function on a MEP.
config cfm lock md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> |
ma_index<uint 1-4294967295>] mepid <int 1-8191> { period [1sec | 1min] | level <int 0-
7> | state [enable | disable]}
This command is used to configure the parameters of the LCK function on a MEP.
md <string 22> - Specify the Maintenance Domain name.
md_index <uint 1-4294967295> - Specify the Maintenance Domain index.
ma <string 22> - Specify the Maintenance Association name.
ma_index <uint 1-4294967295> - Specify the Maintenance Association index.
mepid <int 1-8191> - Specify the MEP ID.
period – Specify the transmitting interval of the LCK PDU. The default is 1 second.
level – Specify the client level ID to which the MEP sends LCK PDU. The default client MD
level is the MD level that the most immediate client layer MIPs and MEPs exist on.
state – Specify the LCK function state used. This state can be enabled or disabled.
Only Administrator and Operator-level users can issue this command.
135