D-Link xStack DGS-3400 Series Reference Manual page 65

xStack
DGS-3450:admin# show authen server_host
Command: show authen server_host
SRV IP Address Protocol
--------------- --------
10.1.1.222 TACACS+
Total Entries : 1
DGS-3450:admin#
config authen parameter response_timeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the amount of time the Switch will wait for a user to authenticate through a console, Telnet, or SSH
application to 60 seconds:
DGS-3450:admin# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DGS-3450:admin#
config authen parameter attempt
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the maximum attempts for user's trying to login or promote the privilege to be 9:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Port Timeout
----- -------
15555 10
This command is used to configure the amount of time the Switch will wait for a user to
authenticate through a console, Telnet, or SSH application.
config authen parameter response_timeout <int 0-255>
Configure the amount of time the Switch will wait for a user to authenticate through a
console, Telnet, or SSH application.
<int 0-255> - The amount time the Switch will wait for a user to authenticate through a
console, Telnet, or SSH application. 0 means there is no time out. Default value is 30
seconds.
Only Administrator can issue this command.
This command is used to configure the maximum number of attempts a user can try to login
or promote the privilege on a console, Telnet, or SSH application.
config authen parameter attempt <int 1-255>
Used to configure the maximum number of attempts that a user can try to login or promote
the privilege on a console, Telnet, or SSH application. If failed login attempts exceeds this
number, the connection or access will be locked.
<int 1-255> - Specify the maximum number of attempts that a user can try to login or promote
the privilege on a console or telnet or SSH application. Default value is 3.
Only Administrator can issue this command.
Retransmit Key
---------- -------------------------
No Use This is a secret
61