D-Link xStack DGS-3400 Series Reference Manual page 549

xStack
DGS-3450:admin# show stack_device
Command: show stack_device
Box ID Box Type
------- ---------------
1 DGS-3450
3 DGS-3450
DGS-3450:admin#
config stacking force_master_role
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the stacking force master role state:
DGS-3450:admin# config stacking force_master_role state enable
Command: config stacking force_master_role state enable
Success.
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
H/W Version
------------
0A1
0A1
This command is used to configure the stacking force master role state.
config stacking force_master_role state [enable | disable]
This command is used to ensure the master role is unchanged when new device add to
current stacking topology. If the state is enabled, the master's priority will become zero after
the stacking has stabilized.
force_master_role - Used to enable or disable the switch's Stacking Force Master Role state.
The default setting is disabled.
Only Administrator and Operator-level users can issue this command.
Serial Number
----------------
1234567890123
2345678901234
545