D-Link xStack DGS-3400 Series Reference Manual page 222

xStack
DGS-3450:admin# download sim_ms configuration_from_tftp 10.53.13.94 c:/dgs3450.txt all
Command: download sim_ms configuration_from_tftp 10.53.13.94 c:/dgs3450.txt all
This device is updating configureation.
Download Status :
ID MAC Address
--- -----------------
1 00-01-02-03-04-00
2 00-07-06-05-04-03
DGS-3450:admin#
upload sim_ms
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To upload configuration files to a TFTP server:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Result
----------------
Success
Success
User to upload a configuration or log file to a TFTP server from a specified member of a SIM
group.
upload sim_ms [configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename>
{[members <mslist> | all]}
This command will upload a configuration or log file to a TFTP server from a specified
member of a SIM group.
configuration_to_tftp – Specify this parameter if the user wishes to upload a switch
configuration to members of a SIM group.
log_to_tftp – Specify this parameter to upload a switch log to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server to upload a configuration or log file to.
<path_filename> – Enter a user-defined path and file name on the TFTP server which is used
to upload files to.
members – Enter this parameter to specify the members the user prefers to upload switch
configuration or log files from. The user may specify a member or members by adding one of
the following:

<mslist> – Enter a value, or values to specify which members of the SIM group will
upload the switch configuration or log files.

all – Add this parameter to specify all members of the SIM group will upload the
switch configuration or log files.
Only Administrator and Operator-level users can issue this command.
Please wait several minutes ...
218