D-Link xStack DGS-3400 Series Reference Manual page 100

xStack
show bpdu_protection
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the bpdu_protection for the entire switch:
DGS-3450:admin# show bpdu_protection
Commands: show bpdu_protection
BPDU Protection Global Settings
---------------------------------------
BPDU Protection status
BPDU Protection Recovery Time
BPDU Protection Trap State
BPDU Protection Log State
DGS-3450:admin#
To show the bpdu_protection status ports 1-12:
DGS-3450:admin# show bpdu_protection ports 1-12
Commands: show bpdu_protection ports 1-12
Port State
------ ------------ ----------- ----------
1 Enabled
2 Enabled
3 Enabled
4 Enabled
5 Enabled
6 Enabled
7 Enabled
8 Enabled
9 Enabled
10 Enabled
11 Disabled
12 Disabled
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to show bpdu_protection status.
show bpdu_protection {ports {<portlist> }}
The show bpdu_protection command is used to display bpdu_protection global configuration
or per port configuration and current status.
portlist - Specified a range of ports to be configured.
None.
: Enabled
: 60 seconds
: None
: None
Mode
shutdown Normal
shutdown Normal
shutdown Normal
shutdown Normal
shutdown Under Attack
shutdown Normal
shutdown Normal
shutdown Normal
shutdown Normal
Block Normal
shutdown Normal
shutdown Normal
Status
96