D-Link xStack DGS-3400 Series Reference Manual page 23

xStack
logout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To terminate the current user's console session:
DGS-3450:admin# logout
show device_status
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the device status of the Switch:
DGS-3450:admin# show device_status
Command: show device_status
Unit 1:
Internal Power: Active
External Power: Fail
Left Fan
Right Fan
Back Fan
CPU Fan
CTRL+C ESC q Quit
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to log out a user from the Switch's console.
logout
This command terminates the current user's session on the Switch's console.
None.
None.
Used to display the current status of the hardware of the Switch.
show device_status
This command displays the current status of the power and fans on the system. In the fan
status display there are fans on the left of the switch, on the right, at the back and a CPU fan,
if the fans are working normally the display will read "OK" in the fan field. If any of the fans fail
the corresponding field will read 'Fail'.
None.
None.
: OK
: OK
: OK
: OK
SPACE n Next Page p Previous Page r
19
Refresh