D-Link xStack DGS-3400 Series Reference Manual page 444

xStack
config stp mst_ports
Syntax
Description
Parameters
Restrictions
Example usage:
To config stp mst_ports:
DGS-3450:admin#config stp mst_ports 1:1 instance_id 0 internalCost auto
Command: config stp mst_ports 1:1 instance_id 0 internalCost auto
Success.
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
config stp mst_ports <portlist> instance_id <value 0-15> {internalCost [ auto | <value
1-200000000> ] | priority <value 0-240>}
Internal Path Cost and Port Priority of a Port in MSTI can be separately configured to
different values from the configuration of CIST (istance_id = 0).
mst_ports - To be distinguished from the parameters of ports only at CIST level.
portlist - One of CLI Value Type , restrict the input value and format of the ports, refer to
section 1-4 Switch Numerical Ranges.
instance_id - Instance = 0 represents for CIST , Instance from 1 to 15 represents for MSTI 1 -
MSTI 15.
internalCost - Port Path Cost used in MSTP.
priority - Port Priority.
Only Administrator and Operator-level users can issue this command.
440