D-Link xStack DGS-3400 Series Reference Manual page 133

xStack
DGS-3450:admin# show cfm linktrace mep mep1 trans_id 26
Command: show cfm linktrace mep mep1 trans_id 26
Transaction ID: 26
From MEP mep1 to 00-11-22-33-44-55
Start Time 2008-01-01 12:00:00
Hop MEPID Ingress MAC Address
--- ----- -------------------
1 - 00-22-33-44-55-66
2 - 00-33-44-55-66-77
3 X 00-44-55-66-77-88
DGS-3450:admin#
delete cfm linktrace
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the CFM link trace reply:
DGS-3450:admin#delete cfm linktrace mepname mep1
Command: delete cfm linktrace mepname mep1
Success.
DGS-3450:admin#
show cfm mipccm
Purpose
Syntax
Description
Parameters
Restrictions
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Egress MAC Address
-------------------
00-22-33-44-55-67
00-33-44-55-66-78
00-11-22-33-44-55
Used to delete the stored link trace response data that have been initiated by the specified
MEP.
delete cfm linktrace {[md [<string 22> | md_index <uint 1-4294967295>] {ma [<string
22> | ma_index <uint 1-4294967295>] {mepid <int 1-8191>}} | mepname <string 32>]}
This command is used to delete the stored link trace response data that have been initiated
by the specified MEP.
md <string 22> - Specify the Maintenance Domain name.
md_index <uint 1-4294967295> - Specify the Maintenance Domain index.
ma <string 22> - Specify the Maintenance Association name.
ma_index <uint 1-4294967295> - Specify the Maintenance Association index.
mepid <int 1-8191> - Specify the MEP ID.
mepname <string 32> - Specify the MEP name.
Only Administrator and Operator-level users can issue this command.
Used to show the MIP CCM database entries.
show cfm mipccm
All entries in the MIP CCM database will be shown. A MIP CCM entry is similar to a FDB
which keeps the forwarding port information of a MAC entry.
None.
None.
Forwarded
---------
Yes
Yes
No
129
Relay Action
------------
FDB
MPDB
Hit