D-Link xStack DGS-3400 Series Reference Manual page 589

xStack
config time_range
Restrictions
Example usage:
To configure the time range time1 to be between 6:30 a.m. and 9:40 p.m., Monday to Friday:
DGS-3450:admin# config time_range time1 hours start_time 6:30:00 end_time 21:40:00
weekdays mon-fri
Command: config time_range time1 hours start_time 6:30:00 end_time 21:40:00 weekdays mon-
fri
Success.
DGS-3450:admin#
show time_range
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current time range settings.
DGS-3450:admin# show time_range
Command: show time_range
Time Range information
--------------------------------------------
Range name : time1
Weekdays : Mon, Tue, Wed, Thu, Fri
Start time : 06:30:00
End time : 21:40:00
Total entries: 1
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Only Administrator and Operator-level users can issue this command.
To view the current configurations of the time range set on the Switch.
show time_range
This command is used to display the currently configured time range(s) set on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
585