D-Link xStack DGS-3400 Series Reference Manual page 514

xStack
config ssh server
Description
Parameters
Restrictions
Example usage:
To config ssh server maxsession is 3:
DGS-3450:admin# config ssh server maxsession 3
Command: config ssh server maxsession 3
Success.
DGS-3450:admin#
enable ssh
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SSH server:
DGS-3450:admin# enable ssh
Command: enable ssh
Success.
DGS-3450:admin#
disable ssh
Purpose
Syntax
Description
Parameters
Restrictions
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
| rekey [10min | 30min | 60min | never] | port <tcp_port_number 1-65535>}
The config ssh server command config the SSH server general information.
maxsession - Specifies ssh server max session at the same time.
contimeout - Specifies ssh server connection timeout.
authfail - Specifies user max fail attempts.
10/30/60 min - Specifies time to re-generate session key.
never - Do not re-generate session key.
port - Specifies the TCP port used to communication between ssh client and server. The
default value is 22.
Only Administrator and Operator-level users can issue this command.
Used to enable the SSH server.
enable ssh
The enable ssh command enables ssh server services. When enabling ssh, telnet will be
disabled.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable the SSH server service.
disable ssh
The disable ssh command disables ssh server services.
None.
Only Administrator and Operator-level users can issue this command.
510