D-Link xStack DGS-3400 Series Reference Manual page 46

xStack
DGS-3450:admin# show acct_client
Command: show acct_client
radiusAcctClient ==>
radiusAcctClientInvalidServerAddresses
radiusAcctClientIdentifier
radiusAuthServerEntry ==>
radiusAccServerIndex : 1
radiusAccServerAddress
radiusAccClientServerPortNumber
radiusAccClientRoundTripTime
radiusAccClientRequests
radiusAccClientRetransmissions
radiusAccClientResponses
radiusAccClientMalformedResponses
radiusAccClientBadAuthenticators
radiusAccClientPendingRequests
radiusAccClientTimeouts
radiusAccClientUnknownTypes
radiusAccClientPacketsDropped
DGS-3450:admin#
config accounting service
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Enable it to configure accounting shell state:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to configure the state of the specified RADIUS accounting service.
config accounting service [ network | shell | system ] state [ enable | disable ]
The config accounting service command is used to enable or disable the specified RADIUS
accounting service.
network - Accounting service for 802.1X port access control. By default, the service is
disabled.
shell - Accounting service for shell events:
When user logs on or out the switch (via the console, Telnet, or SSH) and timeout occurs,
accounting information will be collected and sent to RADIUS server. By default, the service is
disabled.
system - Accounting service for system events: reset, reboot. By default, the service is
disabled.
enable - Enable the specified accounting service.
disable - Disable the specified accounting service.
Only Administrator and Operator-level users can issue this command.
0
D-Link
0.0.0.0
0
0
0
0
0
0
0
0
0
0
0
42