D-Link xStack DGS-3400 Series Reference Manual page 515

xStack
Example usage:
To disable the SSH server service:
DGS-3450:admin# disable ssh
Command: disable ssh
Success.
DGS-3450:admin#
show ssh server
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the SSH server:
DGS-3450:admin# show ssh server
Command: show ssh server
The SSH Server Configuration
Maximum Session
Connection Timeout
Authentication Fail Attempts
Rekey Timeout
TCP Port Number
Bypass Login Screen State
DGS-3450:admin#
config ssh publickey bypass_login_screen state
Purpose
Syntax
Description
Parameters
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to show the SSH server.
show ssh server
The show ssh server command show the ssh server general information.
None.
None.
: 3
: 300
: 2
: 60min
: 22
: Enabled
Used to enable or disable the option to bypass the login screen, to avoid a secondary
username/password authentication for users using SSH public key authentication.
config ssh publickey bypass_login_screen state [enable | disable]
This command is used to enable or disable a secondary username/password authentication
after using SSH public key authentication. The default configuration of this feature is
disabled. The login screen will be displayed and requires a secondary username/password
authentication after using SSH public key authentication.
enable - Specifies to bypass the username/password login screen to avoid a secondary
authentication after using SSH public key authentication. If this method is specified, the login
user using SSH public key authentication can execute command directly with the initial
privilege level of the login user.
disable - Specifies to need a secondary username/password authentication after using SSH
public key authentication. If this method is specified, the login user using SSH public key
authentication must pass username/password authentication before execution shell is
obtained. The initial privilege level depends on the secondary username/password
511