D-Link xStack DGS-3400 Series Reference Manual page 148

xStack
debug show status
Parameters
Restrictions
Example usage:
To show the specified module's debug state:
DGS-3450:admin# debug show status module MSTP
Command: debug show status module MSTP
Debug Global State: Enabled
MSTP : Enabled
DGS-3450:admin#
To show the debug state:
DGS-3450:admin# debug show status
Command: debug show status
Debug Global State: Enabled
SYS : Enabled
OS : Enabled
MSTP : Enabled
ACL : Disabled
CLI : Enabled
SNMP : Disabled
IGMP : Enabled
DGS-3450:admin#
debug config state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the debug state to disabled:
DGS-3450:admin# debug config state disable
Command: debug config state disable
Success.
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
<module_list> - The module list.
Only Administrator and Operator-level users can issue this command.
Use the command to set the state of the debug.
debug config state [enable | disable]
Use the command to set the state of the debug.
enable - Enable the debug state.
disable - Disable the debug state.
Only Administrator and Operator-level users can issue this command.
144