Command History List - D-Link xStack DGS-3400 Series Reference Manual

xStack
The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
?
config command_history
show command_history
Each command is listed, in detail, in the following sections.
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all of the commands in the CLI:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Parameters
{<command>}
<value 1-40>
Used to display all commands in the Command Line Interface (CLI).
? {<command>}
This command will display all of the commands available through the Command Line Interface
(CLI).
{<command>} – Entering the question mark with an appropriate command will list all the
corresponding parameters for the specified command, along with a brief description of the
commands function and similar commands having the same words in the command.
None.
C
OMMAND
97
12
H L
ISTORY IST