D-Link xStack DGS-3400 Series Reference Manual page 487

xStack
DGS-3450:admin# download firmware_fromRCP rcp: rcp_user@10.1.1.1/home/rcp_user/DGS-
XXXX.had
Command: download firmware_fromRCP rcp: rcp_user@10.1.1.1/home/rcp_user/DGS-XXXX.had
Connecting to server................... Done.
Download firmware...................... Done.
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
DGS-3450:admin#
To download firmware from RCP Server using rcp string without user name specified, and global RCP Server was not
configured:
DGS-3450:admin# download firmware_fromRCP rcp: 10.1.1.1 DGS-XXXX.had
Command: download firmware_fromRCP rcp: 10.1.1.1 DGS-XXXX.had
Using RCP Server Username
Connecting to server................... Done.
Download firmware...................... Done.
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
DGS-3450:admin#
To download firmware from RCP using global configured server:
DGS-3450:admin# download firmware_fromRCP src_file /home/DGS-XXXX.had
Command: download firmware_fromRCP src_file /home/DGS-XXXX.had
Using RCP Server IP: 172.18.212.106
Using RCP Server Username
Connecting to server................... Done.
Download firmware...................... Done.
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
Please wait, the switch is rebooting...
DGS-3450:admin#
To download firmware from RCP without specifies the RCP Server and remote user:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
: rcp_user
: rcp_user
Do not power off!
Do not power off!
Do not power off!
483