D-Link xStack DGS-3400 Series Reference Manual page 314

xStack
config address_binding ip_mac
Restrictions
Example usage:
To configure an IMPB entry:
DGS-3450:admin# config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-00-
00-11
Command: config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-00-00-11
Success.
DGS-3450:admin#
To configure a static IPv6 IMPB entry:
DGS-3450:admin#config address_binding ip_mac ipv6address fe80::240:5ff:fe00:28
mac_address 00-00-00-00-00-11
Command: config address_binding ip_mac ipv6address fe80::240:5ff:fe00:28 mac_address 00-
00-00-00-00-11
Success.
DGS-3450:admin#
show address_binding
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the IMPB global configuration:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
is applied to all ports.
Only Administrator and Operator-level users can issue this command.
Used to display the IMPB entries, blocked MAC entries and port status.
show address_binding [ip_mac [all | [ipaddress < ipaddr > | ipv6address <ipv6addr>]
mac_address < macaddr >] | blocked [all | vlan_name <vlan_name> mac_address
<macaddr> ] | ports {<portlist>}]
This command is used to show the IMPB information.
ip_mac - Specify the user created IMPB database.
blocked - Specify the addresses in the database that the system has auto learned and
blocked.
ipaddr - Specify the learned IP address of the entry in the database.
ipv6addr - Specify the learned IPv6 address of the entry in the database.
macaddr - Specify the MAC address of the entry or the blocked MAC address.
vlan_name - Specify the name of the VLAN to which the blocked MAC address belongs.
ports - Specify the ports for which the information is displayed. If not specified, all ports are
displayed.
None.
310