D-Link xStack DGS-3400 Series Reference Manual page 497

xStack
Example usage:
To add redirect ports for special RSPAN VLAN on intermediate or destination switch:
DGS-3450:admin# config rspan vlan vlan_name vlan2 redirect add port 1:18
Command: config rspan vlan vlan_name vlan2 redirect add port 1:18
Success.
DGS-3450:admin#
show rspan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Display the specific settings:
DGS-3450:admin# show rspan vlan_id 63
Command: show rspan vlan_id 63
RSPAN : Enabled
RSPAN VLAN ID : 63
-------------------
Mirror Group ID : 1
Target Port
Source Ports
RX : 1:2-1:5
TX : 1:2-1:5
Redirect Ports : 9
Total RSPAN VLAN : 1
DGS-3450:admin#
Display all settings:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to display RSPAN configuration.
show rspan {[vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]}
This command displays the RSPAN configuration.
vlan_name - Specify the RSPAN VLAN by VLAN name
vlan_id - Specify the RSPAN VLAN by VLAN ID.
None.
: 1:1
493