D-Link xStack DGS-3400 Series Reference Manual page 265

xStack
To disable the Generic VLAN Registration Protocol (GVRP):
DGS-3450:admin# disable gvrp
Command: disable gvrp
Success.
DGS-3450:admin#
show vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
DGS-3450:admin# show vlan
Command: show vlan
VID : 1
VLAN Type : Static
Member Ports : 1:1-1:25
Static Ports : 1:1-1:25
Current Tagged Ports
Current Untagged Ports: 1:1-1:25
Static Tagged Ports
Static Untagged Ports : 1:1-1:25
Forbidden Ports
VID : 4094
VLAN Type : Static
Member Ports : 1:4,1:8
Static Ports : 1:4,1:8
Current Tagged Ports
Current Untagged Ports:
Static Tagged Ports
Static Untagged Ports :
Forbidden Ports
Total Entries: 2
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to display the current VLAN configuration on the Switch.
show vlan {[<vlan_name 32> | vlanid <vidlist>] | ports <portlist>}
This command displays summary information about each VLAN including the VLAN ID,
VLAN name, the Tagging/Untagging status, and the Member/Non-member/Forbidden status
of each port that is a member of the VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which to display a summary of settings.
vlanid <vidlist> − Users may alternately choose the VLAN to be displayed by entering the
VLAN ID.
ports <portlist> − Users may also view VLANs by designated port.
None.
VLAN Name
Advertisement : Enabled
:
:
:
VLAN Name
Advertisement : Disabled
: 1:4,1:8
: 1:4,1:8
:
: default
: v1
261