D-Link xStack DGS-3400 Series Reference Manual page 234

xStack
show dnsr
Syntax
Description
Parameters
Restrictions
Example usage:
To display DNS relay status:
DGS-3450:admin# show dnsr
Command: show dnsr
DNSR Status
Primary Name Server
Secondary Name Server
DNSR Cache Status
DNSR Static Table Status : Disabled
DNS Relay Static Table
Domain Name
--------------------------------
www.123.com.tw
Total Entries: 1
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
show dnsr {static}
This command is used to display the current DNS relay status.
static − Allows the display of only the static entries into the DNS relay table. If this parameter is
omitted, the entire DNS relay table will be displayed.
None.
: Disabled
: 0.0.0.0
: 0.0.0.0
: Disabled
IP Address
---------------
10.12.12.123
230