Front Suspension Adjustment; Front Fork Disassembly And Assembly - Suzuki GSX-R600 Manual

Front Suspension Adjustment

After installing the front fork, adjust the spring pre-load
and two kinds of damping force as follows:
WARNING
!
Adjust the left and right front forks to the
same setting.
Spring Pre-load Adjustment
• Turn the damping force adjuster (1) counterclockwise
fully. It is at softest position and turn it out to standard
setting position.
• Turn the adjuster (1) to the desired position.
STD position
7 turns in from softest position
Damping Force Adjustment
Rebound damping force
Fully turn the damping force adjuster (1) clockwise. From
that position (stiffest), turn it out to standard setting
position.
STD position
1-3/4 turns out from stiffest position
B837H12206003
1
I837H1220010-01
1
I837H1220011-02
Compression damping force
Fully turn the damping force adjuster (1) clockwise. From
that position (stiffest), turn it out to the standard setting
position.
STD position
1-3/4 turns out from stiffest position

Front Fork Disassembly and Assembly

Refer to "Front Fork Removal and Installation (Page 2B-
2)".
NOTE
The right and left front forks are installed
symmetrically and therefore the disassembly
procedure for one side is the same as that for
the other side.
Disassembly
1) Loosen the front fork cap bolt (1).
2) Install the special tool to the holes "A".
Special tool
(A): 09940–94930 (Front fork spacer holder)
1
(A)
Front Suspension: 2B-4
1
I837H1220012-02
B837H12206004
"A"
I837H1220013-01