Field Service Ver. 1.0 Sep. 2008
7.3.33
1st image transfer pressure/retraction clutch (CL4)
1. Remove the driving unit assy.
See P.85
[1]
[2]
[1]
[2]
[2]
[3]
[3] [4]
[1]
A00FF2C080DA
[2]
A00FF2C081DA
[1]
A00FF2C082DA
2. Remove three screws [1], remove
two E-rings [2], and remove two
bearings [3].
3. Remove the 1st image transfer pres-
sure/retraction clutch assy [4].
4. Remove the E-ring [1], and remove
the 1st image transfer pressure/
retraction clutch [2].
NOTE
• When reinstalling the shaft and the
1st image transfer pressure/retrac-
tion clutch, make sure that the pro-
trusion [1] on the 1st image transfer
pressure/retraction clutch fits into
the locking slot [2].
7. Other
101