Ancillary Device Connection - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Ancillary Device Connection allows installation of selected peripheral (ancillary) devices to a multiline

terminal. This feature enhances peripheral device objectives.

An UNIVERGE SV8100 multiline terminal user can accomplish this by using the AP(R)-R/APR-L Unit

(Analog Port Adapter with Ringer) or AP(A)-R Unit (Analog Port Adapter without Ringer) for analog

telephone devices, or installing the AD(A)-R/APA-L Unit to connect devices such as tape recorders.

The AP(A)-R/AP(R)-R/APA-L Units are the interface for installing a single line telephone, Modem, credit

card reader, wireless headset, NEC Conference Max Conferencing unit or other compatible analog

The PSA-L Unit (Power Save Adapter), an optional adapter for the ITL/DTL Terminals, is used to make

or receive a call using the Public Switched Telephone Network (PSTN) when a call cannot be made with

the ITL/DLT extension.

The optional device fits underneath the terminal.

A single line telephone connected to an AP(R)-R Unit or AP(A)-R Unit cannot perform

Trunk-to-Trunk Transfer and does not support a conference with itself and two outside

A single line telephone connected to an AP(R)-R Unit or AP(A)-R Unit does not support

Message Waiting Indication or Caller ID Indication.

An AP(R)-R Unit (analog port adapter with ringer) can be installed on a multiline terminal

and function separately from the multiline terminal.

When Program 10-03-06 is assigned as APR you cannot manually assign a port number for

an APR. The system uses ports 193~256 (starting with 256 and working down) for a total

of 64 APR ports. APR 1 uses port 256, and APR 2 uses port 255, and so on.

When Program 10-03-06 is assigned as APR you cannot manually assign a port number for

DTP-2DT-1 and DTR-2DT-1 telephones have a built-in APA adapter.

Phones that have an APR/APA installed do not pass voice to a trunk until the interdigit time

expires (Program 21-01-03).

When a single line phone is connected to an AP(R)-R or APR-L, a conference cannot be

established unless the 2nd channel of ESI is used for APR in Program 10-03-06 and

Program 10-03-07.

Ancillary Device Connection

Table of Contents