NEC Univerge SV8100 Features And Specifications Manual page 386

Issue 11.0
Conditions
The ITL-8R-1 does not support the Manual or Automatic registration modes to the SV8100.

The ITL-8R-1 does support the Plug and Play registration mode to the SV8100.

If using the Base Switching option, Cordless DECT Terminal programmable keys:

1~4 can be set as a Programmable Function key such as Trunk Line Keys

5 and 6 can be set as One-Touch keys

7 and 8 are reserved for Base Switching and cannot be programmed

If the Base Switching option is not used, programmable keys 1~8 can be programmed as

Programmable Function Keys such as Trunk Line Keys.
The DTL-8R-1 Cordless DECT Terminals can be used in conjunction with the UNIVERGE

SV8100, and DTL Digital Multiline Telephones.
The ITL-8R-1 Cordless IP DECT Terminal can only connect directly to the SV8100 and be

used as a stand alone terminal.
The ITL-8R-1 DECT IP Cordless – cannot be connected with DT300 or DT700 terminals.

Battery Capacity is 910 mAh, 2.4V with a Talk Mode of 16 hours (typical) and a Standby

Mode of seven days (typical).
The battery can be hot swapped while on a call. The battery must be replaced with another

charged battery pack within 20 seconds, otherwise the connection is lost.
The handset has visual and audible indicators to warn of a low battery condition.

When a message is received, the message icon is displayed.

Synchronous Ringing does not apply to the cordless terminals.

A beep indicates when the cordless terminal receives off-hook ringing.

A spare battery is available as an Optional Available Part. A second battery is not shipped

with the product.
The battery can be charged when it is installed in the handset or in the base charging unit

and the handset is in the charger. A stand-alone battery charger is not available.
Environments with many metal parts, metal shelves, or metal buildings are known to reduce

telephone performance.
When multiple cordless telephones are used in your office, they must operate on different

channels and be at least 20 feet apart (including the base unit and the telephones).
term
D cordless and DECT telephones do not ring when receiving a doorbox call. Notification

is shown in the display.
term
D cordless and Cordless DECT telephones can activate the door strike relay using a

Recall key assigned in the phone configuration or, by a Flash Key assigned to one of the
line keys in Program 15-07 (751: 62) (Version 4000 or higher software is required).
2 - 354
UNIVERGE SV8100
Cordless DECT Terminals