NEC Univerge SV8100 Features And Specifications Manual page 83

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-03-01 ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
10-03-06 ETU Setup (DLCA PKG Setup) –
Terminal Type (B2)
11-06-01 ACI Extension Numbering
11-08-01 ACI Group Pilot Number – Dial
Analog Communications Interface (ACI)
Description/Comments
Assign or display the current
terminal type assigned to B
Channel 1 for each port on the
DLCA.
Assign or display the current
terminal type assigned to B
Channel 2 for each port on the
ESI.
Assign extension numbers to ACI
software ports. Select a number
outside of the normal extension
number range.
Assign pilot numbers to ACI
groups. When a user dials the pilot
number, they reach an available
ACI software port within the group.
Assigned Data
1
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)

7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
0 = Not set
6 = PGD(2)-U10 ADP
(Paging)
7 = PGD(2)-U10 ADP
(Tone Ringer)

8 = PGD(2)-U10 ADP
(Door Box)
9 = PGD(2)-U10 ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
ACI Ports: 1~96
(default not assigned) 
Up to eight digits
ACI Groups 1~16 
(default not assigned)
Issue 11.0
Level
2 3
2 - 51