Clock/Calendar Display - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

The system uses Clock/Calendar Display for:

Central Office Calls (Access Maps)

Class of Service (Class)

Direct Inward Lines

Display Telephones

Night Service (Automatic)

Programmable Trunk Parameters

Using the Daylight Savings Setup program, you can determine whether the system should automatically

adjust the system time for daylight savings time/standard time changes.

Clock Adjustment

The system can be programmed to automatically adjust the system clock on a nightly basis. This feature

allows you to make adjustments should the system cabinet regularly lose or gain time.

The system retains the Clock/Calendar Display after a power failure or system reset.

Changing the time may change the current Class of Service (COS) service depending on

the COS mode setup.

You can program the system to automatically switch modes.

Single line telephones cannot set the time and date.

Changing the system time automatically changes the VM8000 InMail time.

Default Setting

Clock/Calendar Display

Station Message Detail Recording

System Reports

Toll Restriction (Class)

Trunk Group Routing

Voice Response System

Table of Contents