NEC Univerge SV8100 Features And Specifications Manual page 156

Issue 11.0
Program
Program Name
Number
26-11-01 Transit Network ID Table –
Transmit Network ID (Carrier ID)
44-01-01 System Options for ARS/F-Route
– ARS/F-Route Time Schedule
44-02-01 Dial Analysis Table for ARS/
F-Route Access – Dial
44-02-02 Dial Analysis Table for ARS/
F-Route Access – Service Type
44-02-03 Dial Analysis Table for ARS/
F-Route Access – Additional
Data
2 - 124
Description/Comments
Enter the Transit Network
Selection information element to
be added to an ARS call using an
ISDN trunk. This information
element identifies a requested
transit network.
Select whether the ARS/F-Route
feature should use the time
schedule (0=not used, 1=used). If
this option is set to 0, the F-Route
table selected is determined only
by the digits dialed without any
relation to the day or time of the
call. If this option is set to 1, the
system first refers to Program
44-10. If there is a match, the
pattern defined in that program is
used. If not, the F-Route pattern in
Program 44-09 and time setting in
Program 44-08 are used.
Set the Dial digits for the
Pre-Transaction Table for
selecting ARS/F-Route (eight
#
digits max: 1~9, 0  , @). To
enter a wild card/don't care digit,
press Line Key 1 to enter an @
symbol.
Set the Service Type (0~3) for the
Pre-Transaction Table for
selecting ARS/F-Route.
If a Service Type is set to F-Route
in Program 44-02-02, set which
F-Route table to use.
UNIVERGE SV8100
Assigned Data
1
0000~9999
(Fixed four digits)
(default not assigned)
0 = Not Used
1 = Used
(default = 0)
Up to eight digits
(Use line key 1 for a
'Don't Care' digit, @)
(default not assigned)
0 = No Setting (None)
1 = Extension Call
(Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension
Analyze Table (Option)
(default = 0)
1=Delete Digit = 0~255
(255 : Delete All Digits)
2=0~500
(0 = No Setting)
3=Dial Extension
Analyze Table Number
= 0~4
(0 = No Setting)
(default = 0)
Automatic Route Selection
Level
2 3




