NEC Univerge SV8100 Features And Specifications Manual page 299

UNIVERGE SV8100
Program
Program Name
Number
15-02-01 Multiline Telephone Basic Data
Setup – Display Language
Selection
(To select options 8~10, press
either 8 or Recall, then press line
keys 1~3. Key 1 is option 8, Key 2
is option 9, and Key 3 is option 10.)
15-02-02 Multiline Telephone Basic Data
Setup – Trunk Ring Tone
15-02-22 Multiline Telephone Basic Data
Setup – Multiple Incoming From
Intercom and Trunk
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
Central Office Calls, Answering
Description/Comments
Define the display language for
multiline terminals. (To select
options 8~10, press either 8 or
Recall, then press line keys 1~3.
Key 1 is option 8, Key 2 is option
9, and Key 3 is option 10.)
Set the tone (pitch) of the
incoming trunk ring for the
extension port you are
programming.
When this option is disabled,
incoming calls to an extension
indicate on any Hotline key for that
extension as solid (busy). When
this option is enabled, lighting is
determined by the setting of
Program 22-01-01 Incoming Call
Priority. If set to trunk priority (1),
the Hotline key lights solid when a
trunk call rings in. If set to intercom
priority (0), the Hotline key does
not light for incoming trunk calls,
but lights solid for intercom calls.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
Assigned Data
1
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
10 = Swedish
11 = Turkish
12 = Latin American
Spanish
13 = Romanian
14 = Polish
(default = 1)
1 = High
2 = Medium
3 = Low
4 = Ring Tone 1
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
(default = 2)
0 = Disable
1 = Enable
(default = 1)
0 = Normal
1 = Special
(default = 0)
Issue 11.0
Level
2 3




2 - 267