NEC Univerge SV8100 Features And Specifications Manual page 294

Issue 11.0
Sidetone Volume Setup
This option allows system programming for the multiline terminal side tone volume. There are two levels,
based on whether the connected trunk is a digital trunk or analog trunk.
Side Tone Auto Setup
Per each analog trunk (or all analog trunks) the most suitable Codec Filter setting for Program 81-07 and
Program 81-17 can be automatically adjusted using Programs 90-68-01 and 90-68-02.
During the trunk measurement process, the following LCD indications are provided:
During measurement: Measurement (x/4)

x = number of measurements
Measure complete: Complete

Error condition: Error
Trunk busy: Busy
After successful measurement, the option to copy the same settings to all analog trunks is shown.
 Side Tone Auto Setup available when the system is in an idle condition.
Conditions
The incoming ring group assignment programmed in Program 41-03-01 overrides the

setting in Program 22-05-01.
Ringing calls can be picked up regardless of access map programming.

An extension user can answer an outside call just by lifting the handset.

Long Conversation Cutoff can disconnect incoming and outgoing CO calls after a set time

period. Using the Warning Tone for Long Conversation feature allows users on outgoing
calls to hear a warning tone prior to the call disconnecting.
Line keys and Call Appearance (CAP) Keys simplify answering outside calls.

If the Absent text message was set by the originating extension, the destination extension

displays the assigned text message instead of the Reason for Transfer message.
If an extension is assigned to a Trunk Access Map that has no access for a trunk, the

extension can still retrieve parked calls on that trunk. The extension can also Group Call
Pickup and Direct Call Pickup calls ringing another extension on that trunk.
In Version 3000 or higher software the system can be programmed to blink the page

number of a DT300/DT700 DESI-Less terminal when it receives an incoming call, or switch
to the page the incoming call is on. Furthermore, a default page can be defined for the
DESI-Less terminal to change to when it goes idle or when it has answered a call.
2 - 262
UNIVERGE SV8100
Central Office Calls, Answering