NEC Univerge SV8100 Features And Specifications Manual page 394

Issue 11.0
Program
Program Name
Number
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
2 - 362
Description/Comments
Turn Off or On an extension
allowing it to force Handsfree
Answerback or Forced Intercom
Ringing for outgoing Intercom
calls.
When an extension is set to ring
mode for ICM calls, enabling this
option prevents callers from
changing the call to voice
announce mode.
Turn Off or On an extension user
ability to use Department Group
Step Calling.
Determine if the ISDN calling line
identity presentation and
screening indicators are to be
allowed.
Enable/Disable Call Address
Information for each Class Of
Service.
Turn Off or On a user Class of
Service from automatically
blocking outgoing Caller ID
information when a call is placed.
If block is enabled, the system
automatically inserts the Caller ID
block code 67 (defined in
Program 14-01-21) before the
user dialed digits (this requires
Program 14-02-10 to be enabled).
If block is disabled, the system
outdials the call just as it was
dialed by the user.
Turn Off or On an extension ability
to display the name and number of
the extension that dialed 911.
Turn Off or On an extension user
ability to override the trunk access
map programming for outgoing
calls.
Enable/Disable an extension
ability to voice over to a busy
virtual extension.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Cordless DECT Terminals
Level
2 3








