NEC Univerge SV8100 Features And Specifications Manual page 349

UNIVERGE SV8100
Code Call Digit Counting

With Code Call Digit Counting, you can limit the number of digits long distance callers can
dial. This lets you prevent callers from dialing extensively into long distance dial-up
services. You can make four entries (4~30 digits).
Toll Free Trunks

Certain trunks can be completely unrestricted, such as the company president's Private
Line. Users can place calls on Code Free Trunks anytime – to anywhere, without
inadvertently being Code restricted.
PBX Call Restriction

Code Restriction programming lets you enable/disable PBX Call Restriction and enter PBX
access codes. You only need to do this if your system is behind a PBX and you have
trunks programmed for behind PBX operation. Refer to
feature for the specifics.
Additional Default Entries For Common Permit Code Table

Additional entries have been added to the default Common Permit Code Table. The default
setting is as follows:
Table 1: 911

Table 2: 1800

Table 3: 1888

Tie Line Code Restriction Enhanced

In Program
set to 0, the system follows the setting in Program
Restriction of Tie Line Calls
Program 34-08 is to be followed. If this option is set to 1, the system follows the system
Code restriction settings defined in Program 21-05-01 through Program 21-05-13.
A user can temporarily override extension Code Restrictions.

The system allows or denies outgoing access to trunks depending on Code Restriction.

If the system detects the call is answered by detecting reversal in an analog trunk this

restores both – way voice paths immediately.
When using DISA or Tie Lines, additional programming is required for Code Restriction

(DISA, refer to Program 25-10; Tie Lines, refer to Program 34-04).
A user can temporarily block their extension Code Restriction access, preventing unwanted

calls from being placed on their telephone while they are away from their desk.
Code Restriction
Table 4: 1822

Table 5: 1833

Table 6: 1844

34-01-05: E&M Tie Line Basic Setup – System Code Restriction, if
to determine whether or not the Code restriction setting in
PBX Compatibility on page 2-1177
Table 7: 1855

Table 8: 1866

Table 9: 1877

21-05-13: Code Restriction Class –
Issue 11.0
this option is
2 - 317